self aligning ball bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.
Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection. This bearing should only be used in light axial load applications due to the small axial capacity.Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing.
- 45 mm x 85 mm x 19 mm ISB 1209 TN9 self aligning ball bearings
- Pillow Block
- 0.0
- 10 mm x 30 mm x 14 mm ISO 2200 self aligning ball bearings
- Angular Contact Ball Bearing
- 0.0
- 65 mm x 140 mm x 33 mm NKE 1313-K+H313 self aligning ball bearings
- K75x81x30
- 75x81x30
- 55,000 mm x 100,000 mm x 25,000 mm SNR 2211KEEG15 self aligning ball bearings
- Mounted Units & Inserts
- 0.0
- 110 mm x 200 mm x 38 mm ISO 1222K self aligning ball bearings
- Pillow Block
- 0.0
- 60 mm x 110 mm x 22 mm NACHI 1212 self aligning ball bearings
- Pillow Block
- 0.0
- Toyana 2312K self aligning ball bearings
- Pillow Block
- 0.0
- 90 mm x 225 mm x 54 mm SIGMA 10418 M self aligning ball bearings
- Flange Block
- 0.0