self aligning ball bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.
Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection. This bearing should only be used in light axial load applications due to the small axial capacity.Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing.
- 8 mm x 16 mm x 8 mm ISB GE 08 BBL self aligning ball bearings
- Flange Block
- 0.0
- Toyana 2211K self aligning ball bearings
- Flange Block
- 0.0
- 45 mm x 85 mm x 19 mm ISB 1209 KTN9 self aligning ball bearings
- Pillow Block
- 0.0
- 25 mm x 62 mm x 24 mm ISO 2305 self aligning ball bearings
- Pillow Block
- 0.0
- 30 mm x 62 mm x 16 mm NKE 1206 self aligning ball bearings
- Pillow Block
- 0.0
- 30 mm x 62 mm x 16 mm SKF 1206 ETN9 self aligning ball bearings
- Flange Block
- 0.0
- 70 mm x 150 mm x 35 mm ISB 1314 K self aligning ball bearings
- Pillow Block
- 0.0
- 75 mm x 130 mm x 31 mm NSK 2215 self aligning ball bearings
- Flange Block
- 0.0
- 8 mm x 24 mm x 8 mm NMB PBR8EFN self aligning ball bearings
- Flange Block
- 0.0