self aligning ball bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.
Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection. This bearing should only be used in light axial load applications due to the small axial capacity.Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing.

- Toyana 1208K self aligning ball bearings
- J7
- Cast Iron

- 110 mm x 200 mm x 53 mm ISB 2222 KM self aligning ball bearings
- Diamond Flange Shape
- 120

- Toyana 2213 self aligning ball bearings
- 110 mm
- PLE211N-

- 25 mm x 62 mm x 17 mm NACHI 1305K self aligning ball bearings
- 48
- 1045 Carbon Steel

- 35 mm x 72 mm x 23 mm SKF 2207 ETN9 self aligning ball bearings
- Punching
- Standard

- 95 mm x 200 mm x 45 mm SKF 1319 self aligning ball bearings
- 23.81 mm
- 7.5 mm

- 40 mm x 100 mm x 25 mm ISB 1309 KTN9+H309 self aligning ball bearings
- Deep Groove Ball Bea
- Bearings with Housin

- 150 mm x 270 mm x 54 mm SIGMA 1230 M self aligning ball bearings
- 42 mm
- EX205-14G2