self aligning ball bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.
Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection. This bearing should only be used in light axial load applications due to the small axial capacity.Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing.
- 75 mm x 130 mm x 25 mm NSK 1215 K self aligning ball bearings
- Pillow Block
- 0.0
- 75 mm x 130 mm x 31 mm FAG 2215-TVH self aligning ball bearings
- Pillow Block
- 0.0
- 35 mm x 80 mm x 21 mm ISO 1307K self aligning ball bearings
- Cam Followers Stud Type
- 0.0
- 100 mm x 215 mm x 47 mm KOYO 1320 self aligning ball bearings
- Cam Followers Stud Type
- 0.0
- 65 mm x 120 mm x 23 mm ISO 1213K+H213 self aligning ball bearings
- Mounted Cartridge Units
- 0.0
- 25 mm x 52 mm x 18 mm NKE 2205-K+H305 self aligning ball bearings
- Pillow Block
- 0.0
- 30 mm x 72 mm x 27 mm FAG 2306-K-TVH-C3 self aligning ball bearings
- Pillow Block
- 0.0
- 6 mm x 19 mm x 6 mm FAG 126-TVH self aligning ball bearings
- Flange Block
- 0.0
- 30 mm x 62 mm x 20 mm SKF 2206EKTN9 self aligning ball bearings
- Pillow Block
- 0.0