self aligning ball bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.
Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection. This bearing should only be used in light axial load applications due to the small axial capacity.Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing.
- 55 mm x 100 mm x 21 mm ISO 1211K self aligning ball bearings
- Flange Block
- 0.0
- 60 mm x 130 mm x 31 mm FAG 1312-TVH self aligning ball bearings
- Flange Block
- 0.0
- 95 mm x 170 mm x 43 mm KOYO 2219 self aligning ball bearings
- Pillow Block
- 0.0
- 19.05 mm x 50,8 mm x 17,46 mm SIGMA NMJ 3/4 self aligning ball bearings
- Cam Followers Yoke Type
- 5.0
- 25 mm x 62 mm x 17 mm SKF 1305ETN9 self aligning ball bearings
- Roller Bearings
- 0.0
- 60 mm x 110 mm x 28 mm KOYO 2212K self aligning ball bearings
- Angular Contact Ball Bearing
- 0.0
- 60 mm x 110 mm x 22 mm FBJ 1212K self aligning ball bearings
- Take Up Units
- 0.0
- 40 mm x 80 mm x 18 mm FBJ 1208K self aligning ball bearings
- Cartridge Unit Bearings
- 0.0
- 100 mm x 180 mm x 46 mm FAG 2220-M self aligning ball bearings
- Flange Block
- 0.0
- 15 mm x 35 mm x 14 mm ISO 2202-2RS self aligning ball bearings
- Mounted Cartridge Units
- 0.0