self aligning ball bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.
Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection. This bearing should only be used in light axial load applications due to the small axial capacity.Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing.
- 110 mm x 200 mm x 38 mm ISO 1222K+H221 self aligning ball bearings
- Cylindrical Roller Bearing
- 0.0
- 65 mm x 120 mm x 31 mm FAG 2213-K-2RS-TVH-C3 self aligning ball bearings
- Mounted Cartridge Units
- 0.0
- 100 mm x 180 mm x 34 mm ISO 1220K+H220 self aligning ball bearings
- Flange Block
- 0.0
- 35 mm x 80 mm x 31 mm KOYO 2307-2RS self aligning ball bearings
- Single Row Ball Bearing
- 0.0
- 45 mm x 100 mm x 25 mm ISO 1309 self aligning ball bearings
- Flange Block
- 2.0
- 12 mm x 32 mm x 10 mm ISO 1201 self aligning ball bearings
- Pillow Block Bearings
- 0.0
- 110 mm x 200 mm x 53 mm FAG 2222-M self aligning ball bearings
- Pillow Block
- 0.0
- Toyana 2208-2RS self aligning ball bearings
- Mounted Cartridge Units
- 0.0
- 127 mm x 254 mm x 50,8 mm RHP NMJ5 self aligning ball bearings
- Mounted Units & Inserts
- 0.0
- 17 mm x 47 mm x 14 mm NKE 1303 self aligning ball bearings
- Flange Block
- 0.0
- 50 mm x 110 mm x 40 mm ISB 2310 K self aligning ball bearings
- Insert Bearings
- 0.0