self aligning ball bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.
Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection. This bearing should only be used in light axial load applications due to the small axial capacity.Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing.
- Toyana 2210K-2RS self aligning ball bearings
- Mounted Units & Inserts
- 0.0
- 55 mm x 100 mm x 25 mm ISB 2211-2RSKTN9 self aligning ball bearings
- Pillow Block
- 0.0
- 35 mm x 80 mm x 31 mm SKF 2307EKTN9 self aligning ball bearings
- Take Up Units
- 0.0
- 75 mm x 160 mm x 55 mm NTN 2315S self aligning ball bearings
- Mounted Cartridge Units
- 0.0
- 85 mm x 180 mm x 60 mm ISB 2317 K self aligning ball bearings
- Flange Block
- 0.0
- 35 mm x 72 mm x 17 mm FAG 1207-TVH self aligning ball bearings
- Single Row Ball Bearing
- 0.0
- 100 mm x 180 mm x 46 mm NKE 2220-K self aligning ball bearings
- Mounted Units & Inserts
- 0.0
- 70 mm x 150 mm x 35 mm ISB 1314 self aligning ball bearings
- Take Up Units
- 0.0
- 80 mm x 140 mm x 26 mm NTN 1216S self aligning ball bearings
- Take Up Units
- 0.0
- Toyana 1205K self aligning ball bearings
- Flange Block
- 0.0
- 100 mm x 215 mm x 47 mm NKE 1320-K self aligning ball bearings
- Flange Block
- 0.0