self aligning ball bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.
Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection. This bearing should only be used in light axial load applications due to the small axial capacity.Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing.
- 110 mm x 240 mm x 50 mm KOYO 1322 self aligning ball bearings
- Flange Block
- 0.0
- ISB TSF 10 BB-O self aligning ball bearings
- AST850SM 5050
- 50
- 5 mm x 19 mm x 6 mm NSK 135 self aligning ball bearings
- Pillow Block
- 0.0
- 90 mm x 160 mm x 40 mm NTN 2218S self aligning ball bearings
- Single Row Ball Bearing
- 16.0
- 25 mm x 52 mm x 18 mm FAG 2205-2RS-TVH self aligning ball bearings
- Flange Block
- 0.0
- Toyana 2205K-2RS self aligning ball bearings
- Pillow Block
- 0.0
- 60 mm x 110 mm x 22 mm ISB 1212 KTN9 self aligning ball bearings
- 6902L11DD1
- 15x28x7
- 100 mm x 180 mm x 46 mm KOYO 2220-2RS self aligning ball bearings
- Flange Block
- 0.0
- 95 mm x 200 mm x 67 mm NKE 2319 self aligning ball bearings
- Flange Block
- 0.0