self aligning ball bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.
Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection. This bearing should only be used in light axial load applications due to the small axial capacity.Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing.
- 40 mm x 80 mm x 23 mm ZEN 2208 self aligning ball bearings
- Flange Block
- 0.0
- 70 mm x 125 mm x 24 mm FBJ 1214K self aligning ball bearings
- Flange Block
- 0.0
- 40 mm x 90 mm x 33 mm ISB 2308 KTN9 self aligning ball bearings
- Take Up Units
- 0.0
- 10 mm x 30 mm x 14 mm ZEN 2200-2RS self aligning ball bearings
- Roller Bearings
- 0.0
- Toyana 2204-2RS self aligning ball bearings
- Flange Block
- 0.0
- 60 mm x 130 mm x 31 mm NKE 1312-K+H312 self aligning ball bearings
- Pillow Block
- 0.0
- 75 mm x 130 mm x 31 mm NTN 2215S self aligning ball bearings
- Mounted Units & Inserts
- 0.0
- 30 mm x 72 mm x 19 mm NACHI 1306K self aligning ball bearings
- Pillow Block
- 0.0
- 45 mm x 85 mm x 23 mm SKF 2209E-2RS1TN9 self aligning ball bearings
- Flange Block
- 0.0
- 80 mm x 140 mm x 33 mm NSK 2216 K self aligning ball bearings
- Flange Block
- 0.0
- 75 mm x 130 mm x 25 mm FBJ 1215 self aligning ball bearings
- Take Up Units
- 0.0