self aligning ball bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.
Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection. This bearing should only be used in light axial load applications due to the small axial capacity.Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing.
- 17 mm x 47 mm x 19 mm NKE 2303 self aligning ball bearings
- Flange Block
- 0.0
- 30 mm x 62 mm x 20 mm ISO 2206 self aligning ball bearings
- Take Up Units
- 0.0
- 130 mm x 230 mm x 46 mm FAG 1226-M self aligning ball bearings
- Flange Block
- 0.0
- 70 mm x 125 mm x 31 mm SKF 2214 self aligning ball bearings
- Mounted Units & Inserts
- 0.0
- Toyana 1300 self aligning ball bearings
- Flange Block
- 0.0
- Toyana 126 self aligning ball bearings
- Flange Block
- 0.0
- 65 mm x 120 mm x 31 mm SKF 2213ETN9 self aligning ball bearings
- Cylindrical Roller Bearing
- 0.0
- 12 mm x 37 mm x 17 mm NTN 2301S self aligning ball bearings
- Flange Block
- 0.0
- 85 mm x 150 mm x 36 mm NTN 2217S self aligning ball bearings
- Flange Block
- 0.0